MAX/MSP and CUI32
Do the MAX/MSP objects that worked with the original Create USB interface work with the CUI32? I really enjoy using MAX and really don't want to use a Terminal program/serial software programming interface!
Jonathan
Views: 90
-
Comment by Dan Overholt on March 7, 2010 at 5:57pm -
Hi Jonathan,
I'll post a compiled HID firmware for the CUI32 that works with Max/MSP when I find the time (and also the source code) - it is of course possible to do exactly as the old CUI board did, and so much more now!
Best,
Dan
-
Comment by Jonathan Richard on March 8, 2010 at 7:22pm -
Thanks, Dan!
Jonathan
-
Comment by Dan Overholt on March 14, 2010 at 3:41am
-
Hi again Jonathan,
I do still plan on making HID firmware for the CUI32 at some point, but I have just posted examples of an extremely simple StickOS program with both MaxMSP and PureData on the Google Code site (click CODE+DOCUMENTATION above). Note that you'll have to update StickOS by using the bootloader to get it functioning properly (new version coming soon). You can change the speed of sensor updates sent to the computer by altering the BASIC line "configure timer 0 for 10 ms" - this will give 100Hz updates as is, but you can go faster or slower by setting the timer interrupt to whatever you want.
Cheers,
Dan
Comment
© 2013 Created by Dan Overholt.
You need to be a member of Overtone Labs to add comments!
Join Overtone Labs